RSS Feed

Tag Archives: MicroGlaze

When in doubt, Craft It Out!

There actually wasn’t going to be a post today as nothing has really inspired me in the past few days and the only idea I had was resisting me today, but I will try to tackle it tomorrow.

I figured I might as well share what I’ve been doing and (unfortunately for some)  I’m still feeling crafty.

SAM_0292

As some of you may know, I’ve been trying out making cabochon and resin jewellery for some time, with mixed results.

I’ve been ordering elements from Beads.pl (a Polish online shop) and they’ve been accumulating at an alarming rate in my DIY basket (yup, that’s a thing!), so it was high time I rolled up my sleeves and got to it.

I decided to make a brooch that will be pinned into my new warn autumn coat, and who better to accompany me on my daily duties than Mr Thornton (I’m officially addicted to that image!).

I also opted for a ring with a Tamara Lempicka Art Deco image, a pair of Fairy Pin Up and Roy Lichtenstein earrings and other bits and bobs.

SAM_0295

I had a cabochon for the brooch, but the other pieces are covered with Diamond Glaze which is one tricky mother, let me tell you!

I’ve learned a lot from the last time I made jewellery for RA Vegas Week, so let me share some observations.

The process is quite simple so how can things go so wrong?:

I find the images I like, scale them and print them out on thicker paper.

During RA Vegas Week I used a cream cardboard with tiny ridges, thinking it’d look vintage,  but I think that was a bad idea, smooth is best.

Many sites recommend you seal the image with MicroGlaze before you tamper with it, however, it’s actually quite pricey and I question the necessity for it.

SAM_0296

Firstly, by applying it (I use my finger), you are already smudging the print a tad.

Secondly, fluff and dust cling to it, so you end up clearing it off with your finger.

Lastly, I don’t know how long it’s supposed to dry because after an hour (I am very impatient) it was still wet.

After the first batch I abandoned priming the image and there’s no difference, so I’d ditch this step.

Anyway, once the image is printed and primed, you can move on to the next step.

If you’re using a cabochon, glue it to your image, hold it down till it sticks and let it dry.

SAM_03011

If you will be covering your picture with resin, or in my case Diamond Glaze, it’s time for the ultimate mind f*ck, meaning cutting out the image to size.

I usually prepare a template beforehand and then draw out the rough size using a pencil.

It’s important to only trim little bits at a time, you can always shave off more if it doesn’t fit.

What’s important at this stage is to have a needle handy: once the size is almost perfect and just needs a tiny trim, it’s beyond annoying to pull the picture out again.

Once it’s perfect (or in my case, almost perfect) glue the image onto your jewellery.

I use Diamond Glaze, which is also quite expensive, but I heard that any glue that dries transparent will do.

If you’re making a ring, brooch, or anything else that doesn’t lay flat, make sure you think of a way to prop it up.

Seems like a logical idea, and yet last time I ended up applying the resin and THEN thinking how to keep it level (a lemon was the answer).

Now I usually make a tiny tube using cardboard and that holds things in place.

SAM_02991

Once your cabochon dries, it’s time to cut it out, although luckily the glass will cover up any rough edges.

Again, take your time carefully shaving off the edges.

Once that’s done, glue it to the jewellery and Voilà!! It’s done.

With the other jewellery the mind f*ck fun isn’t over.

Carefully pour the resin / Diamond Glaze onto your image, starting from the centre outwards in a circular motion.

You need to take it slow, but if some bubbles appear, pop them with a needle or, if they are stubborn, push them to the edge (and hope for the best).

Word of warning, bubbles may appear while the Diamond Glaze is drying.

I’d recommend not fiddling with it though, it’s easy to mess up the smooth surface at this stage and bubbles will be the least of your problems.

Once that is done, cover your pieces with a plastic cup so they protected from dust and fluff and wait 12 to 24 hours for them to dry and harden.

It really can be a fickle thing, but I guess that’s what makes it fun, but only if it works.

If it doesn’t it’s frustrating enough to make you tear your hair out!

My favourite from the bunch was the ring with a Tamara Lempicka image:

SAM_0331

On the whole, I think cabochon jewellery is a bit easier and the risk of messing up big time is much lower, having said that all my Thornton silhouette jewellery never comes out quite right.

There’s also something to be said about the glossy simplicity of Diamond Glaze, so it’s tough to call.

The earrings I made are adorable and came out quite well.

 I asked an old friend to model them for you 😉

I used a Roy Lichtenstein painting and cropped the image.

Remember that if you are sticking a cabochon onto a picture of a face, make sure it’s centred.

The cabochon edges are rounded and will distort even the prettiest features (I learned that on a picture of poor Thorin).

SAM_0318

I also have some other more RA/Thorin stuff done, but I’ll keep it a secret until closer to The Hobbit DOS première.

SAM_0319

BTW, while I was putting together this post, I actually got one more thing done from my crafty list.

I’ve always been frustrated at the quality of pictures I take to show stuff like jewellery on the blog, so I decided to make my very own DIY Photo light box.

I’ve been defending a cardboard box for over a month from getting binned, tried to get my hands on white tissue paper (for some unknown reason they seem to only sell it packed with all of the other colours of the bloody rainbow…), pulled out my craft knife (me and sharp objects don’t mesh).

Everything would be fine if it wasn’t a bloody gloomy day and there’s no natural light to speak of, so the images are either too bright (when I use the flash) or too dark.

Anyway, here are some other things I made:

The not quite right but good enough Thornton brooch:

SAM_03391

We’ve been reading more paper books recently, so a bookmark is very much needed:

SAM_0341

See, that’s why I always say that whenever I go DIYing, things turn out OK, but never perfect 😉

There may be not one decent picture for today, but one of these days, camera and photos, I’m going to have the upper hand!

%d bloggers like this: